Posts tagged: lighting
Hero Camper exterior lights
When we bought the Hero Camper we opted for having exterior lights installed, one in each corner of the roof-rack, with a simple controller inside the cabin. The two rear lights were facing backwards, …
New Hue downlights in the basement
Our house has a small, two-room basement. Both rooms are 10 m² and the innermost room is my home office. I recently installed three more Philips Hue lights in the stairway and first basement room; …
Testing and installing a Hue compatible Zigbee dimmer
I recently got a Namron Zigbee dimmer for our kitchen counter LED strip. It claimed to be compatible with the Philips Hue bridge, and it was 😃
My new home office
In our new house there is an 20 m² basement, it consists of two rooms — both 10 m². I have turned the inner room into my new home office/server room, with my electronics lab and homelab.
Making a simple LEGO LED street light
My twins and I both like LEGO, and LEDs. I figured I’d make some simple LED street lights that we could use to build a LEGO scenery.
I made a garden playhouse for the kids — with LED lights
I built a garden playhouse, for the kids, and of course it needed some LED lights.
Putting flickering LEDs in christmas decoration
Mounting a few orange flickering LEDs in my mom's miniature elf house Christmas decoration.
Sticking a LED-strip behind my TV
I'm sticking a LED-strip to the back of my TV to create bias lighting.
Putting LED lights in a IKEA play kitchen
Installing some lights in Ikea kids play kitchen, using a cheap LED-strip from eBay.
Making kitchen cabinet LED lights
Two self made LED down-lights, each with four 10mm high-intensity LEDs.
AVR mood light, 500mA per channel
Turn any RGB LED into a mood light with this controller. Uses an AVR ATmega8 microcontroller.
AVR mood light, 100mA per channel
Simple mood light controller with three PWM channels, max 100 mA per channel. Uses the AVR ATmega8 microcontroller.
Controller for lights and relays — AVR driven
Control three lights or relays, with toggle switches and status LEDs. Uses an AVR ATtiny2313 microcontroller.